60 found, showing page 3 of 4
$15.49
4-7/8 ADJ L-ANGLE Z-MAX
Used to reinforce angle connections. Field adjustable (skewable) 0 deg. to 135 deg. angles. Bend 1 time only. Shipped at 45 deg. angle. 18-gauge galvanized steel. Also available with ZMAX coating.
View Details
$3.79
9" STRAP TIE
Designed for use on the edge of 2x members, with a nailing pattern that reduces the potential for splitting. They can be used where plates or soles are cut, at wall intersections, and as ridge ties. Galvanized steel.
View Details
$8.656
CONCEALED HANGER Z-MAX
Concealed flange hanger available for 2x6, 2x8, 2x10, and 2x12 lumber. Ideal for end of ledger/header or post conditions. Also provides cleaner lines for exposed conditions such as overhead decks. Value engineered for strength and economy as well as installation ease. 18-gauge galvanized ZMAX steel.
View Details
$12.99
CONCEALED HANGER Z-MAX
Concealed flange hanger available for 2x6, 2x8, 2x10, and 2x12 lumber. Ideal for end of ledger/header or post conditions. Also provides cleaner lines for exposed conditions such as overhead decks. Value engineered for strength and economy as well as installation ease. 18-gauge galvanized ZMAX steel.
View Details
$13.49
MEDIUM L-ANGLE Z-MAX
The ML angle combines strength and versatility through the use of Simpson Strong-Tie Strong-Drive screws (SDS). Fastener holes are staggered to minimize wood splitting and opposing hole patterns allows for back-to-back installation without fastener interference. 12-gauge ZMAX steel.
View Details
$18.49
2X6" MEDIUM L-ANGLE Z-MAX
The ML angle combines strength and versatility through the use of Simpson Strong-Tie Strong-Drive screws (SDS). Fastener holes are staggered to minimize wood splitting and opposing hole patterns allows for back-to-back installation without fastener interference. 12-gauge ZMAX steel.
View Details
$151.99
EPOXY-TIE ADHESIVE
SET-XP is a 1:1 2-component, high solids, epoxy-based anchoring adhesive formulated for optimum performance in both cracked and uncracked concrete. When SET-XP adhesive is used with all threaded rod or rebar, the system can be used in tension and seismic zones where there is a risk of cracks occurring that pass through the anchor location. It is also suitable for uncracked concrete conditions.
View Details
$4.49
3-1/8X5 TIE PLATE
The nail-on tie plate is used to reinforce wood-to-wood connections on flat members. This product is generally used in home repair projects. Holes are sized for 8d common or 8d x 1-1/2" nails. 20-gauge galvanized steel.
View Details
$3.49
HURRICANE TIE
Provides resistance to uplift and lateral forces. Designed to help counter the effect of high wind and seismic events on a structure. Used also for general tie purposes, strongback attachments, and as an all-purpose tie where 1 member crosses another. Install in pairs to connect 2x rafter to top plate. Some sizes available with ZMAX coating.
View Details
$13.043
U SHAPE GALV HURRICANE TIE
Provides resistance to uplift and lateral forces. Designed to help counter the effect of high wind and seismic events on a structure. Used also for general tie purposes, strongback attachments, and as an all-purpose tie where 1 member crosses another. Install in pairs to connect 2x rafter to top plate. Some sizes available with ZMAX coating.
View Details
$22.195
2X6 ADJUSTABLE U HANGER
This hanger may be sloped up or down and skewed left or right (up to 45 deg.) in the field, offering a versatile solution for attaching joists and rafters. 1-9/16" W x 4-7/8" H x 1-1/2" A flange; use 6-10d fasteners on face and 5-10d x 1-1/2" fasteners on joist. 18-gauge galvanized.
View Details
$98.255
6X6 POST CAP BASE Z-MAX
The BC series offers dual purpose post cap/base for light cap or base connections. Do not install bolts into pilot holes. Install with 16d common nails or 16d x 2-1/2" joist hanger nails. Post bases do not provide adequate resistance to prevent members from rotating about the base and are not recommended for non top-supported installations (such as fences or unbraced carports). 18-gauge galvanized steel. Some sizes available in ZMAX coating.
View Details
$72.96
4X4 ELEVATED POST BASE
The EPB series provides a connection between a post (or column) for decks, patio covers and other top-supported structures. Added standoff adjustability to suit a variety of applications. Install in wet concrete. Simpson Strong-Tie elevated base plate allows 1 In. to 2-1/2 In. clearance above concrete. 12-gauge base plate, 1-1/16 In. O.D. x 8 In. or 12 In. pipe. Post bases do not provide adequate resistance to prevent members from rotating about the base and therefore are not recommended for non top-supported installations (such as fences or unbraced carports). Simpson Strong-Tie gray paint (may be ordered HDG-hot dip galvanized).
View Details
$4.79
3X6 MENDING PLATE
Versatile and easy-to-use mending plates for wood-to-wood connections. No nails or notching of wood required. For nonstructural applications only; not for truss applications. 20-gauge galvanized steel.
View Details
$5.79
MUDSILL ANCHOR Z-MAX
Mudsill anchors are easy-to-install. They are suitable for either stemwall or slab foundations and easily mount on the forms before the pour, simplifying finishing and reducing anchor mislocation problems. The model No. MASAZ eliminates the need to drill the mudsill and can be installed 3 different ways to provide flexibility when stud placement or sheathing becomes an issue. Install with (9) 10d x 1-1/2" fasteners. 16-gauge galvanized ZMAX coated steel.
View Details